News:

Howdy, Com-Pac'ers!
Hope you'll find the Forum to be both a good resource and
a place to make sailing friends.
Jump on in and have fun, folks! :)
- CaptK, Crewdog Barque, and your friendly CPYOA Moderators

Main Menu

Basic questions from "newbie"

Started by Byron of Bedford, February 27, 2019, 06:51:22 PM

Previous topic - Next topic

Zephyros

#15
Quote from: Byron of Bedford on February 27, 2019, 06:51:22 PM
Question 1) Can't find  6 that will fit but saw a comment on the forum saying he had one. Recommendations?

While looking up some information on my Scepter brand 3 gallon fuel tank I saw they also have it in a 6 gallon model, same footprint just 3.4" taller.
3 gallon:  19.3"L x 12.2"W x 6.8"H
6 gallon:  19.3"L x 12.2"W x 10.2"H

The 3 gallon length and width fits fine in my Sun Cat fuel locker, measure the height of your fuel locker to see if the 6 gallon, 10'2" height will fit, it will be close but may work?

https://www.basspro.com/shop/en/scepter-portable-fuel-tank
https://www.defender.com/product.jsp?id=3236795
https://www.amazon.com/Scepter-Marine-Portable-Fuel-Tank/dp/B01BNBCRRS?th=1&psc=1


Catawampus

In my experience, stale fuel has been more of a problem than capacity. I've gone from the 6 gallon tank to a 3 gallon, followed by dropping the 3 gallon and just using the integral tank on my outboard supplemented by a couple of 1 gallon portables that fit in the gas locker.

Zephyros

Quote from: Catawampus on March 11, 2019, 01:20:43 PM
In my experience, stale fuel has been more of a problem than capacity.

Here is my recipe to beat stale fuel, I fill my 3 gallon tank with Non-Ethanol fuel from a station I found through pure-gas.org, then I add 1 oz. of Biobor EB to the tank. I found Biobor EB from a couple of Practical Sailor articles. In the spring the remaining fuel goes into the car and I fill up with a fresh tank for the season or until it's empty after making headway into to many Texas windstorms.  After one season of Biobor EB my new to me 2007 Tohatsu 4 HP carburetor is on my workbench for winter rebuild (first time since new), it is relatively clean with no obvious varnish, the bowl has no residue or varnish, just a little water corrosion I attribute to the previous owners use of Ethanol fuel and/or past phase separation.

Storage Tips for Gasoline and Diesel
https://www.practical-sailor.com/blog/Storage-Tips-for-Gasoline-and-Diesel-10911-1.html

Biobor EB Still Tops in Additive Rematch
https://www.practical-sailor.com/issues/37_23/features/eb-still-tops-additive-rematch-biobar_10915-1.html

Hammonds Biobor EB, Ethanol Buster and Performance Enhancer Gasoline Treatment
https://www.amazon.com/gp/product/B007D2C0I8/ref=oh_aui_search_asin_title?ie=UTF8&psc=1

Tim Gardner

Suncat sighting on Smith Mountain Lake!  Driving over Halesford Bridge this afternoon, I spotted a pretty blue suncat becalmed with the skipper sipping a sudsy.  So I pulled over and hailed the relaxed rogue, "you must be Byron Of Bedford!" To which came the reply, "why, yes, I am.". A brief conversation ensued, and off I went, pleased to have made the acquaintance of another Compaconaut.
TG
Never Be Afraid to Try Something New, Remember Amateurs Built the Ark.  Professionals Built the Titanic (update) and the Titan Submersible.

Byron of Bedford

More update:

Took Sun Cat out for first time. So impressed and satisfied with performance, comfort and ease. Launching and rigging was a breeze as was retrieval.

What was shocking was I stopped and anchored for lunch and all of a sudden a car drove up on near by shore, a guy got out and yelled "Are you Byron of Bedford?" (WHAT!? The...?!) It was Tim Gardener who one of you mentioned on this post. He was driving by and saw a Sun Cat! What are the chances?!

A few reflections:
1) I installed the bungee lazy jacks recommended on one of the posts. Wow! Such a great enhancement for single handed sailing.
2) The advice regarding adjusting keel to improve handling was priceless advice. Really makes a huge difference.
3) installed a Windex and Yes to this addition. Very helpful.
4) Outboard motor tiller extension is not really needed and is too long for this boat. Forego.
5) I installed a Tiller Clutch. Absolutely fantastic. Simple and easiest design by far. Expensive but worth it in my opinion.

All in all I am elated with boat. Thanks to everyone for great advice! Tim, I'll see you on your legendary boat dock on SML!

Tim Gardner

Byron,

Saw you moored up at the dock next door over the weekend.  I was ashamed that you saw the pitiful state my 19 appeared to be in.  I hate mildew.  Sadly, with Vicki's back issues and surf-wake boats plying the summer waters, we don't sail much in the summer.

Did you sail up or motor the whole way?  In any event, two Com-Pacs in Timothy's Cove is a rare sight indeed.

Regards, TG
Never Be Afraid to Try Something New, Remember Amateurs Built the Ark.  Professionals Built the Titanic (update) and the Titan Submersible.

DanM

To go back to the fuel question: I'm no mechanic so all I can do is follow reasonable-sounding advice. I had my 5HP Honda repaired a few years ago, and the mechanic told me that one of the best things I can do for the motor (besides using non-ethanol gas) is to not leave fuel in the carburetor. Every time I use the motor, if I'm not going to use it in the next few days, I pull the fuel line off while idling and let the motor run dry to a stop. Just following advice.. anyone else do this?
By the way, the repair was to replace the carb because the little plastic mechanism of the choke had broken. When I asked the mechanic if he had any other advice, he said, "Yea, be less manly with the choke!"

Bramble

Same advice I received with my Honda 2.3.  At the end of a sail I shut off the fuel & let her run dry.

Bramble

The PO of my current c-16 sailed Smith Mountain Lake