News:

Howdy, Com-Pac'ers!
Hope you'll find the Forum to be both a good resource and
a place to make sailing friends.
Jump on in and have fun, folks! :)
- CaptK, Crewdog Barque, and your friendly CPYOA Moderators

Main Menu

16 on e-bay

Started by rickwick, July 14, 2012, 08:57:02 AM

Previous topic - Next topic

rickwick

 This 1978 boat has damage the seller says is repaired but not painted. Being in a crucial location like that I have to wonder. $2500 is too much for this boat with an old, Johnson motor. It is sad too see one in that condition.
I have been looking for some time now so I know what they are going for.
Am I wrong?

MacGyver

I would agree with you. We have a 16 on the lot worth around 3 grand.
I is in need of a good cleaning and has a newer motor on it.
Not for sale but my boss and I looked at it and tried to contact the owner to see if we could buy it.

I would have to see pictures of this boat you are talking about but id say sight unseen 2500 is asking too much for it. It would have to have a number of extras in good shape to make it worth it.

Mac
Former Harbor Master/Boat Tech, Certified in West System, Interlux, and Harken products.
Worked on ALL aspects of the sailboat, 17 years experience.
"I wanted freedom, open air and adventure. I found it on the sea."
-Alaine Gerbault.

carry-on

Rickwick,
I could not find the 16 on ebay. $2500 is too much for a less than excellent '77. I believe the pre 1980 CP-16s had some balsa coring and were netorious for leaks around the cabin hatch.
Have you looked at the 1990 16 in Casseberry,Fl? It is on the Orlando Craig's list asking $4,000. Only one picture shown. Sounds like a good unit and not too far from you. Duggest you take a good look at the trailer with any boat. If the boat is poor the trailer is often worse.
Good luck and have fun searching.
$UM FUN TOO

CP-16 Hull# 2886

Salty19

"Island Time" 1998 Com-pac 19XL # 603

kickingbug1

 i agree with salty. if i sold my 81 it would be less than $2000.
oday 14 daysailor, chrysler musketeer cat, chrysler mutineer, com-pac 16-1 "kicknbug" renamed "audrey j", catalina capri 18 "audrey j"

Eagleye

"Madame Z"   2006 Eclipse    #42

rickwick

carry-on, I spoke with him today and will see it tomorrow. I say I want a 19 but there are so many 16's and they seem to be such bargains. I am tempted.
The pics with the ad for "Sweet Dreams" shows what I believe is a 16 and a 19 side by side...what a difference!
I also read an ad for a 16 where they talked about a 3 day trip with 2 people, I am only 1. (My lady friend says she will not be sailing with me!)
I also want to see the 16 in West Palm Beach for $4250, she looks very clean.
Rick

Bob23

Is it just me or does this seem like a $1000.00 boat, max?
bob23

kickingbug1

oday 14 daysailor, chrysler musketeer cat, chrysler mutineer, com-pac 16-1 "kicknbug" renamed "audrey j", catalina capri 18 "audrey j"

MacGyver

OMG.........WOW....... Stay away from that..... and that repair looks like bondo......... could be that the epoxy hardener is affected by humidity and turned redish (which isnt a bad thing, just slight performance issues but nothing critical....)   and if it is bondo, or even bondo glass, that is junk, Bondo will soak up water....

Id save your money and walk away.....hell I would run away unless you got it for 500.

Just my opinion, but I being a repair guy would give much more that 500 for it, all of it, cause there is a lot of work there. A boat is a money pit as it is, so dont let one suck you dry before you even get it home.

Mac
Former Harbor Master/Boat Tech, Certified in West System, Interlux, and Harken products.
Worked on ALL aspects of the sailboat, 17 years experience.
"I wanted freedom, open air and adventure. I found it on the sea."
-Alaine Gerbault.

MacGyver

HELL< There is that Doug guy in the classifieds selling his 19

Buy that, I am outrageously happy with ours!
Former Harbor Master/Boat Tech, Certified in West System, Interlux, and Harken products.
Worked on ALL aspects of the sailboat, 17 years experience.
"I wanted freedom, open air and adventure. I found it on the sea."
-Alaine Gerbault.

MacGyver

As I read farther, the guy said it was repaired after a storm in 2001..... that repair is probably UV damaged..... and may no longer be structurally sound, Epoxy has no UV protect, which is why you must paint it.........

Any questions Let me know...... Good luck.
Former Harbor Master/Boat Tech, Certified in West System, Interlux, and Harken products.
Worked on ALL aspects of the sailboat, 17 years experience.
"I wanted freedom, open air and adventure. I found it on the sea."
-Alaine Gerbault.

carry-on

Rickwick,
The unit in WP has a foiled rudder and a gas outboard. Pluses! IMO. The diagram shown in the WP craigslist is for a 19 not a  16.
Both the Casselberry boat and the WP show furlers, a plus or minus depending on your preference.
If you really want a CP-19 and  can handle the rig alone, keep looking. There were only 624?? made compared to about 3000 CP-16s, so the hunt is tougher, but the 19 is a different league for space.

$UM FUN TOO

CP-16 Hull# 2886

rickwick

Only 625 19s made, that is why I'm not finding many. I thought people were just hanging on to them. I think they are selling their 16s to move up.
I was not considering the 16 on ebay, just commenting on it.
Going to look at a 16 in Orlando today. No motor,  but a 1990 model. Thanks for the advice carry-on.
If that "Doug guy" wants to bring her to Fla we will talk, 3000 miles I can't do. I do appreciate his ad with all the pictures.

Short Sale

There is a 97 CP 19XL on Craigslist in Charleston SC this week (July 8, 2012)

http://charleston.craigslist.org/boa/3079673563.html
1987 Com-Pac 16/II #2454