News:

Howdy, Com-Pac'ers!
Hope you'll find the Forum to be both a good resource and
a place to make sailing friends.
Jump on in and have fun, folks! :)
- CaptK, Crewdog Barque, and your friendly CPYOA Moderators

Main Menu

Additional Storage Under VEE Birth In CP-19.

Started by skip1930, October 08, 2011, 09:54:10 AM

Previous topic - Next topic

skip1930


A 16" x 16" hatch with a underside edge to lay-in and support the hatch. Some 150 foot anchor line is tied to the compression post so as not to be lost if anchor deploys unexpected. Blankets, more PFD's, and other stuff.


Here is the foam under the vee birth. Lots of vertical room above foam to underside of Vee birth.


Good place for speed paddle wheel and depth sounder instruments. Some 6" in front and 6" to either side of leading edge of keel. Foam was trimmed away to find the bottom of the hull for this installation. These are two, two inch drilled holes. Rayathon Bi-Data unit.


Job 'Le Fini'.