Com-pac 19 galley option question

[DOUG142]

Sweet Dreams came with the galley option, HOWEVER, some of it is missing.  Like the tank for fresh water and where does the used water go?  And the faucet pump doesn't work.  Does anyone have a picture of their galley and parts.  Where to get replacement parts for this.
Thanks,
Doug
Also looking for a new outboard motor mount.

[brackish]

Is this your pump?

[DOUG142]

kindof, but different.  It has the pump push like that, but the spout is much like a regular faucet.  Where are the tanks?  Mine are missing.
I take it there should be one for cold water and one for the waste water. No?
Thanks for any help on this, Linda wants the galley option.  We have the sink, removable cabnet that folds out into a small table and the pump faucet that we do not know if it works or not yet.
doug

[brackish]

kindof, but different.  It has the pump push like that, but the spout is much like a regular faucet.  Where are the tanks?  Mine are missing.
I take it there should be one for cold water and one for the waste water. No?
Thanks for any help on this, Linda wants the galley option.  We have the sink, removable cabnet that folds out into a small table and the pump faucet that we do not know if it works or not yet.
doug

My 23 came with the sliding components, stove to port, sink to starboard.  No waste tank for the sink.  Thru hull with a flexible hose for the sink drain.  Flexible hose for the the supply line to the pump.  Tank, (mine is a poly hard version) under the forward berth, starboard side.  Waste tank required where you are for other than sewage?

I don't like the pump (the one pictured is mine) that particular motion is very difficult for my chronic bursitis, am currently converting to pressure pump for the sink and with a wash down hose bib under the starboard cockpit seat.

[wes]

My 1988 CP 19 doesn't have the galley option, but I was reading my owner's manual last night and it clearly says the waste water from the galley is discharged directly into the bilge, from whence you're supposed to pump it out using the bilge pump. Boy, that sounds like a really bad idea, but there you go.

[rdcvsmith]

Hi there,
New guy here, boat just came home last week, trying to get it cleaned up some before covering it up for the winter! Many comments to share and lots of questions to come but I'll start here:

I have removed the galley option to clean but I may keep it out. I have followed the sink discharge hose. Owners Manual says it empties to the bilge... I cleaned out the bilge (13 years of condensation and critter crap ... thank god for wet/dry shop vacs!) I see the large bilge pump hose in the bilge and leading up to the hand pump.

I do not see the sink discharge hose anywhere. I follow it from the galley position, forward then right though the starboard storage area, from there it leads under the starboard quarter berth area but I don see it empty into the bilge.

Where does is go or where should it go?
(the first of many posts to come!)
thanks
Ray

[Salty19]

Ray, you may want to contact the factory or just run some water through it and see where it comes out?

[botelerr]

http://www.amazon.com/Affinity-Works-300FSK-Woodworkers-Chest/dp/B003TO5996

I was ready to build some storage for the 19 when I saw this on line. It arrived today , genuine China tool chest ,, not real high in quality but better than the egg grate I currently have....may need a coat of real varnish... getting lazy in my old age...RBB