News:

Howdy, Com-Pac'ers!
Hope you'll find the Forum to be both a good resource and
a place to make sailing friends.
Jump on in and have fun, folks! :)
- CaptK, Crewdog Barque, and your friendly CPYOA Moderators

Main Menu

This is serious...I've run out of projects....

Started by brackish, November 13, 2015, 11:26:03 AM

Previous topic - Next topic

brackish

Started thinking about my winter project list and came up with .....nothing.  I've made so many improvements and modifications that I'm flat out.  Not counting a planned haul out late winter/early spring to do the bottom, wax, put new striping detail tape on, which I consider maintenance, I've got nothing to add.  Is it time to get a new boat?:)

relamb

Yes, something is seriously wrong here, you're supposed to run out of money before running out of projects.  Get rid of that thing and get a bigger boat, at least twice as old.  You're not doing it right.

Rick
CP16 CP23 CP27
Zionsville, IN

Salty19

I would suggest to see a psychiatrist as soon as possible.  In the real world, there is no such thing as running out of boat projects.  You're living in some sort of alternative universe where no boat projects exist. Serious, indeed.

Fear not, we will snap you out of this malaise.

Tell you what...since we're friends, come on up and I'll keep you busy until Christmas with projects.  My list is long.

But seriously, did you see my tiller-to-outboard steering link thread in the DIY section?  That seems right up your alley.
Other ideas:   Full polish job.  Dorade box with vent.  Any electronics you've been lusting after. Canvas, nylon and splicing projects.  Sealing bilge cover (mine is now growing mold on it, so I'm building a new cover).  Split anchor locker.  Filler cushions for cabin.  Synthetic rope lifelines. 
Big 'ol Bowsprit. 

Here is my list, perhaps this may draw some inspiration:

1.) Hand held line reel with ball bearings.
2.) Wood outboard shifter (version 2)
3.) Aforementioned bilge cover
4.) Top swim ladder step mini-platform
5.) Wood and CF plate emergency rigging knife (no rust!)
6.) battery relocation
7.) Swing arm for electronics (which is already checked off your list)
8.) Varnish a few goodies.
9.) Lightweight gas tank cover with mainsheet and radio pouches.

I didn't say I would complete them all mind you...

If you're truly bored, make a canoe or kayak. I'll let you know the specs I'm looking for :) lol
"Island Time" 1998 Com-pac 19XL # 603

HeaveToo

There's a big thread on the 23 site about solar!  LOL

You could always take up scrimshaw. 
Døyr fe, døyr frender
Døyr sjølv det sama
men ordet om deg aldreg døyr
vinn du et gjetord gjevt

Bob23

Brack:
   Not to worry!!! Your Compac-o-naut friends are here to help! We're sending all of our teak out to you for a total strip down a fresh varnish. I personally prefer 8 coats but I'll settle for 7. Thanks...I hope this helps.

Vipersdad

Here are two fun projects.

I have two boats started.  A Portuguese Dinghy on a tarp in my living room, and a Puddle Duck Racer in my garage.

www.pdracer.com

Plus $250 of epoxy, etc., in a plastic bin, also in my living room.  The living room allows me room temperature for epoxy work and a straight exit out the side door when needed.

V.
s/v  "MaryElla"   Com-Pac 19 / II  #436
Iceboat "Red Bird"--Polar Bear 10-Meter, Built 1953

Lake Winnebago, Lake Mendota, Lake Namakagon, Lake Superior.

"To Hutch, Gerry, Buck, and Clarkie--Who made it so much fun.".....Robert F. Burgess, Author-Handbook of Trailer Sailing 1984

brackish

Quote from: Vipersdad on November 13, 2015, 05:23:44 PM
Here are two fun projects.

I have two boats started.  A Portuguese Dinghy on a tarp in my living room, and a Puddle Duck Racer in my garage.

www.pdracer.com

Plus $250 of epoxy, etc., in a plastic bin, also in my living room.  The living room allows me room temperature for epoxy work and a straight exit out the side door when needed.

V.

Oh no, do not talk to me about building another boat.  I'm trying to finish up my Bateau FS14 skiff, I've got about two interior fairings to go and then final paint, and the cold has gotten me.  Epoxy cures are taking about three days to be sandable.  In a few weeks, if I don't get it finished, it will be too late till spring.  So close.....I don't think the Admiral is going to let me bring it in the living room.

outside



inside, (outside is wrapped for protection)




brackish

But seriously, did you see my tiller-to-outboard steering link thread in the DIY section?  That seems right up your alley.

I'm beginning to think I can't live without that steering link.


9.) Lightweight gas tank cover with mainsheet and radio pouches.

Forgot about that one.  I have been considering making a hinged, teak gas tank cover and getting rid of that heavy slide in piece of fiberglass. 

This has been helpful with, of course, the exception Bob23's suggestion and Vipersdad, who could not have known that I never want to see another jug of epoxy or can of wood flour again in this lifetime.


HeaveToo

I was thinking about adding some sort of propane locker.  I actually thought about finding one of the cockpit combing inserts and adding that to the fuel tank area.  It would be covered, vent out the drain holes for the cockpit, and it was be safe and out of the way.
Døyr fe, døyr frender
Døyr sjølv det sama
men ordet om deg aldreg døyr
vinn du et gjetord gjevt

Cats Paw

 Have you considered a Heliport Platform addition For the arrival and departure of your boating guest. Or a Granite Wet-bar and Hot Tub.

Mas

Ok, No Mas here. I am sitting on my trailer needing:

1 some led upgrades
2 new staysail stay rivets on the mast bracket
3 some maintenance on my brightwork
4 solar project being planned
5 a thru hull replaced
6 new transducer for my knot meter

Brackish you will be too late to accomplish the winterizing of me but the above list can be had at! Also thinking I may join the 21rst century and try to get my owner to give me a chart plotter, though do like the sound of paper charts being opened. Maybe you can convince them that this is a good idea? I will glad to also convince them to provide as much 12oz ballast as necessary to give the requisite instability!

Don't hesitate to set up times to accomplish these items!
S/V  'Mas' ' 87 CP16/2

relamb

The helicopter landing pad is a good idea.  At the Fort Lauderdale boat show a few years ago, I stopped at the Bell Helicopter booth to look at a used helicopter that was $1.2 million.  They had some engineers in the booth who would help design a landing pad customized for your specific boat.
Rick
CP16 CP23 CP27
Zionsville, IN

Mas

So Brackish, haven't heard from you yet on the timing for taking care of the items on No Mas? I know you are probably getting antsy with no projects so just sayin ....!
S/V  'Mas' ' 87 CP16/2

brackish

Quote from: No Mas on November 15, 2015, 07:09:11 PM
So Brackish, haven't heard from you yet on the timing for taking care of the items on No Mas? I know you are probably getting antsy with no projects so just sayin ....!

I hate to tell you but it is not winter here, my boat is still in the water where she will stay all year long and I am anticipating doing an overnight this coming Thursday, wind and weather look good.  So," No Mas" will just have to soldier on without my help.:)