New Rigging?

[K3v1n]

Hey Marcus,
I found you posted these rigging spec.

Rigging Specifications
Standing Rigging Diameter 5/32"
Main Halyard Length 51'
Main Halyard Type 5/16" Sta-Set
Jib Halyard Length 51'
Jib Halyard Type 5/16" Sta-Set
Mainsheet Length 56'
Mainsheet Type 5/16" Sta-Set
110% Jib Sheet length 35'
110% Jib Sheet Type 5/16" Sta-Set
155% Genoa Sheet length 43'
155% genoa Sheet Type 5/16' Sta-Set

Just want to check with you that these numbers are correct because I need a new jib halyard, mine has decided to come apart. So I figure I might as well replace both jib and main while I'm at it.

While I am asking questions...Where is a good place to purchase a genoa and roller furler? I'm already tired of wrestling that darn jib!

Thanks,
Kevin

[Craig Weis]

Hey skip here, these numbers are correct as I pulled these lines out straight in my yard and measured them with my 100 foot  tape. Bank on it.

[Craig Weis]

The furler on my C-P 19 is a model '00' Harken unit. I have the complete specs and 'how too' manual that I am willing to copy and send to you if you e-mail me your address. owlsnest34@hotmail.com thanx.
skip. Oh and the lengths speced above for lines allow the lines to be run back to the cockpit for single person sailing. I bought the new line at WestMarine.

[K3v1n]

Thanks Skip email on the way!

-Kevin