Com-Pac 16 Specifications and Data Sheet

[CPYOA]

Members:  You are welcome to post relevant information here to build a complete CP16 data archive.  Keep it factual and brief..emphasis on factual (be as precise as you can when posting).
Note:  Your data may be collected and stored to this post by a moderator.  If your post disappears, the information is just moved to keep this an easy to print/view format.


The Com-Pac 16 Specifications and Data Sheet
(This reference sheet last updated on August 01, 2003.)

These specifications are for all original Com-Pac 16 models, starting in 1974 with hull #1 and continuing to until 1984 with hull #2201. The original Com-Pac 16 does not have a bowsprit, which is probably the most reliable way to differentiate them from the later models.



Basic Dimensions

Length Overall (LOA)  -  16'

Waterline Length (LWL)  -  14'

Beam  -  6'

Draft  -  1' 6"

Mast Height (Above Waterline)  -  21'

Displacement  -  1,100#

Ballast  -  450#[/list:u]

Sail Plan Geometry

Please DO NOT use these dimensions for ordering sails.  These were moved from the original CPYOA site and have been reported to be wrong.  Please go out and measure your rig to make sure you don't end up returning a sail to the sailmaker.

Sail Area  -  115ft.2

Sail Area: Mainsail  -  72ft.2

Sail Area: 110% Jib  -  43ft.2

Sail Area: 155% Genoa  -  60ft.2

"I"  -  12' 9"

"J"  -  4' 6"

"P"  -  16' 3"

(15' 3" is probably the correct measurement - ed)

"E"  -  8'

LP 110%  -  4' 11"

LP 155%  -  6' 11"

LP 165%  -  7' 5"

LP 180%  -  8' 1"[/list:u]

Rigging Specifications

Forestay Length  -  (missing)

Forestay Diameter  -  5/32"

Shroud Length  -  (missing)

Shroud Diameter  -  5/32"

Main Halyard Length  -  41'

Main Halyard Type  -  1/4" Sta-Set

Jib Halyard Length  -  38'

Jib Halyard Type  -  1/4" Sta-Set

Mainsheet Length  -  35'

Mainsheet Type  -  1/4" Sta-Set

110% Jib Sheet Length  -  27'

110% Jib Sheet Type  -  1/4" Sta-Set

155% Genoa Sheet Length  -  55'

155% Genoa Sheet Type  -  1/4" Sta-Set[/list:u]

Racing Handicaps

PHRF  -  335

Portsmouth  -  107.5[/list:u]

[/list][/list][/list][/list]
_________________________________________________________________________________
Additional Information for sail specifications, Courtesy of our member MaritimeElevation

According to Gerry Hutchins, the original CP16 MK1 mainsail is 72 sq ft and the original MK2/3 mainsail is 65 sq ft. In terms of reef point placement, I would think that the 10% difference in sail area between the two would make for a different optimal placement. Below is the info Gerry sent when I asked Hutchins about rig dimensions:

COM-PAC 16 MAIN-72 SQ.FT., JIB-43 SQ.FT., I-12.75, E-8', P-15.35' J-4.5,

LP-6.08', GENOA-60 SQ.FT., GENOA LP-9.08', CR.  SPIN.-180% MAX.  GIRTH-1.8XJ

COM-PAC 16/2,16/3 MAIN-65 SQ.FT., JIB-55 SQ.FT., I-14.25, E-7.5', P-15.45, J-5.5', LP6.67, GENOA-65 SQ.FT., GENOA LP-8.65', CR.  SPIN.-180% MAX GIRTH-1.8X
___________________________________________________________________________________

[Solid_Tude]

These specifications are for all original Com-Pac 16 models, starting in 1974 with hull #1 and continuing to until 1984 with hull #2201. The original Com-Pac 16 does not have a bowsprit, which is probably the most reliable way to differentiate them from the later models.

Extend that to hull number 2133, as I have a CP16 without a bowsprit.  Could this be because it is a 10th Year Anniversary Edition?

[Pacman]

Forestay length for my 1976 C-16 is 13 feet, 3 inches.

If another member can confirm that is stock and correct, we could add it to the Data Sheet

[Garyandjoanlee]

Awesome. Thanks. Does the year of a 16 ll matter?

[Chris D]

Does anybody know what the size of the turnbuckles are?