Teak and Holly Sole thickness

[HJ51]

I'm assuming it's veneer over plywood.  Does anyone know if it's 1/4" or is it less?  Concerned about sanding it to refinish if it's less than 1/4".  Thanks in advance.

[HideAway]

It is a veneer.  The teak and holly part is about 1/16".  You would be better off to refinish rather than sand.  In my case the T&H had delaminated so the sole had to be replaced.  I made a video during the HideAway refit showing the removal of the sole.  I also made one of showing the replacement.  Hope this helps  M

removal link:     https://youtu.be/VayEq1Gvbx8

Replacement link     https://youtu.be/wJNtBVQ_Z60 

[Blown Away]

You may be interested in this.

http://www.nautikflor.com

[HJ51]

Hideaway:  thanks!  Very helpful.