Together Time, 1989 CP19, FOR SALE

[MacGyver]

We have decided to sell, and are selling the boat for $10,500.

It is in indoor storage currently, and the mast is kept at my house in my garage.
Has a furler as well, stored right next to the mast.

I can have this boat ready for a serious buyer, but to get it out of the indoor storage may take a little, so I would need to know ahead of time.

I can be reached at 618-780-3585
The original post is copied here and will be updated.

It is hull number 513.

The list of what has been done to the boat is lengthy, and the boat is literally completely redone.

Completed by June 2012
New Halyards and dock lines (Color coded, Main is red, Mainsheet is white with red fleck. Jib Halyard is green, Jib Sheet is White with Green fleck) ALL DACRON

Completed by July 2013
All Nav lights were replaced (Bow and Stern)
New Headliner
All new hardware (bolts/fasteners, etc.)
Jib Downhaul with Harken micro blocks
Original Deck blocks refitted with Harken ball bearing replacements.
Mainsail Cover with Lazy Jack slits
Harken Lazy Jacks
Replaced Motor with Tohatsu Sailpro 6hp ULTRA long shaft (August 2013) ($1600)
Jib bag
New Bimini (has a cover, and can be used when sailing with no interference, also
SS fittings in lieu of plastic and adjustable track, frame is double walled aluminum)
New Anchor Light (didnt have one before, installed on the ACC switch)
New Steaming light fixture
New 4 wire thru deck plug in for mast
New anchor line (100 ft of 3/8 Nylon with eye + swivel and shackle)
ALL hardware rebedded with new hardware and Butyl Tape
Repaired all deck issues (cant list, better to explain)
Full bottom Job using Interlux 2000, and Fiberglass BottomKote paint Blue. ($1700)
Paint Topsides with Interlux PERFECTION "Platinum" and stripe with Brightsides "Royal Blue"
Paint deck with Interlux PERFECTION "Platinum" and "Mediterranian White???" and utilized a nonskid compound called GripTex modifier.
****All wood coated in Spar Varnish****
****NEW Eyebrows installed.****
Sheet bag
New Compass with Teak backer and plastic cover
Spaced the motor mount off the transom with HDPE and added a aluminum backer plate, and installed 4 more bolts.
Added backer plates to the swim ladder.
Fiberglass foil of the rudder plate, and primer and paint like bottom.
NEW lifelines, AMSTEEL lines and CS JOHNSON fittings
Lifeline cushions (made in 2012, revamped in 2013)
Group 31 battery (12 V)
Went through all original wiring and repaired all issues.
Forward hatch, replace both handles with rebuild kits
New spreader boots
Install turnbuckle covers
Replace motor mount wood plate with Plastic one
Forespar Tiller extension handle
Davis Instruments Windex
Tiller handle was epoxied and Spar varnished.

TRAILER:
New Galvanized rims and tires and spare tire.
New bunks and bunk carpet
Spare tire carrier
New coupler
New trailer jack
New winch
New bearings, and Marine grease
New center rollers (replaced with better than the black junk rubber.....cant remember the type they were......)
New V roller and changed V roller to mate with the boat properly. (same material as the boat rollers)
New Lights, and added a plug to be able to remove the tongue to fit it into a 24 foot length if needed (like in my garage)

The boat will come with:
Jib bag and Mainsail cover
2 main sails, 2 head sails, a 155 Genoa, and a 115 Jib. All in great shape.
Floating Winch handle by LEWMAR
Pump handle.
Sheet bag
Interior organizer bag
Hatch board for AC unit and foam board to allow it to sit in cockpit.
AC unit
Sail bags for every sail
Forespar tiller extension handle (new 2013)
-Misc stuff-

All repairs made with WEST SYSTEM EPOXY and INTERLUX products.
All outdoor fabric is Sunbrella Marine fabric.

The boat gets complimented easily on how nicely done it is. This boat is in the kind of shape that if you bought a 19, and gave it to the marina to get all the work done (Where I used to work) this is what it would come out like.
I am a professional boat repair man, with 14 years experience, so this isnt just a DIY job. Part of the job even had representatives from Interlux on hand when work was being done.

Asking price is $10,500 Or Best Offer, so make an offer!
I ask that all offers be serious as we will be serious about considering them.
****= edited on OCT 18, 2015 to reflect changes.

Here are a few pictures, and The link to the album.






This is to the slideshow:
http://s1241.photobucket.com/user/JGDVS/slideshow/CP19%20For%20Sale




This boat is literally ready to go to a slip, or trailer sail. It is in indoor storage for the last few months, and will continue to be until sale to preserve the boat in its current shape.
The boat is packed for travel should someone buy it. And people that have seen this boat can attest that it is basically like "NEW" condition, with fresh everything, just read my first post for details.

Thank you for looking.

Mac
dtjasondavis@gmail.com
618-780-3585 (call anytime, mobile phone, leave message if no answer.)

[Salty19]

Really sorry to hear you are selling, but understand how life can get in the way sometimes. 

This is one of the nicest--if not THE NICEST, CP19 I've ever seen. If Com-pac was still producing these boats it would be hard to tell the difference between yours and brand-new. 
Updated with a lot of new high quality components, totally restored by a professional and now waiting for a new proud owner.  If anyone is looking for an as-new CP19, this is the one.

Becky and I hope you still will be active here and of course attend CLR in the future!  Good luck with the sale.

[kickingbug1]

    sorry to see you are selling "together time". after all the work and innovation that you have put into her it seems a shame. to anyone out there looking for a very, i said "very very  VERY nice 19" your search is over. she is exceptional inside and out----just add water. and to jason----you and ginger are always welcome aboard "Audrey J"  just call me a day in advance and we will go.

[MacGyver]

Thanks for the kind words from you both, and to all that have messaged me as well.
It was a tough decision, that we mulled over for a good bit before deciding.

As a addition to this ad, I would take the engine off the boat and sell the boat separate if need be, as well as we are open to any offers. We just ask that buyers are serious, as we are serious about the sale of the boat.

I am leaving it on here for now, and when I have time will expand to other sites when time allows me too.

Thanks all,
Mac

[MacGyver]

To add to this sale, I have located numerous sailboat parts, and project items that will go with the boat. As well as the left over paint from the original repainting of the boat, a large dock box, and a hitch extension that makes it really nice when launching the boat.

I have also added rollers to the trailer this year to make it easier to pull and launch.

Mac

[kickingbug1]

 cant tell you how sad this makes me. a clr without "together time" there. unthinkable. and where will your additional crew from last year ride. good luck with the sale. a prettier 19 doesnt exist (well mike's is nice too). just a thought matt was talking about going bigger------

[MacGyver]

This boat is still for sale, just bumping back up with the sailing season looming ahead!

Mac

[kickingbug1]

   jason, we are somewhat torn on your decision. on the one hand we want you to sell your boat for a good price, on the other we would hope you would reconsider.  i would hope that if the boat isnt sold by july that you and ginger would sail her one last time at the clr. this might also be a good opportunity for someone to move up to a larger boat. to see her is to love her. it goes without saying (but ill say it) that you are welcome to crew for me at any time.

[gcerrito]

Did you sell the boat?