Need a favor-measurements needed

[Salty19]

Sorry to need to ask, my boat is in storage some distance away at the moment and I'm looking for measurements for some projects to determine if I need to procure more wood.

Would anyone be so kind as to give me a couple of measurements from your CP19? I meant to get these before storing the boat but overlooked it.

-Cockpit footwell depth at forward end of cockpit.  From cockpit floor to bridge deck. Should be about 12" ?
-Cockpit footwell length from bridge deck to locker opening (before it curves under the locker).
-Distance between top of the bilge pump casing to the seating surface.

Doesn't need to be super accurate--1/4" off either way is fine for now.


Thanks guys...appreciate it!

[Salty19]

Would appreciate a reply, any takers?

[Tim Gardner]

As soon as I get home on tuesday the 19th if you don't have it already.
TG

[comfortably numb]

Salty, I will go to the yard tomorrow, a mile away, and call you with measurements. It is under a tarp but accessible if you need any thing else here in UA.

[Salty19]

Thank you, Bill!  I saw you called, I'll give you a callback tomorrow evening. 

Tim, many thanks for the offer. Enjoy Florida while you're there and please say hello to the Admiral.

[Elk River]

Hi Salty:

     Today was a little warm here in MD, so I went out in the back yard for those measurements.  I have a 1986 19/2 and these are the ones you were looking for as pertains to my boat: 

     footwell depth @ fwd end:  10 inches

     cockpit sole length, bridge deck to gas locker:  52 inches

     distance from top of bilge pump casing to seating surface:  2 inches  (I have replaced the original casing with a Whale one with a door so the rubber is no longer exposed to the sun; the casing measurements should be the same or very similar)

     I hope this helps.

     Fair winds,

     Elk River

[Salty19]

Thank you Bill and Elk River! Got what I needed!