News:

Howdy, Com-Pac'ers!
Hope you'll find the Forum to be both a good resource and
a place to make sailing friends.
Jump on in and have fun, folks! :)
- CaptK, Crewdog Barque, and your friendly CPYOA Moderators

Main Menu

Gas Tank Cover

Started by mrtoad, March 17, 2014, 09:38:14 AM

Previous topic - Next topic

mrtoad

the stern gas tank cover - a bit of an issue - a bit of a rattle , at times - difficult some times to get off and on

replacement ??   has anyone replaced this?  to make accessing the gas tank a bit more easy?  teak maybe?

thank you so much for your help - this forum is so friendly and helpful

rdeal  /  mr toad

skip1930

#1
I bought a teak organizer from West Marine and mounted that to the front of my CP-19 fuel tank cover. It not only holds things, but acts a handle.

A rattle? Buy some thin closed foam whether strip from AutoZone

skip.



MacGyver

MrToad,

I have a 19, and understand your pain.... it is a bit of a jerk to get it off, and that rattle is a bit of a issue usually happening when the engine is running sometimes.

I have seen someone make a teak grate on a smaller boat before. A bit of self adhesive foam on the cover itself will help with the rattle, but getting it off to access the tank, well, I have only got a suggestion. I grab the bottom a certain way and then pull upwards kind of pushing it towards the stern...... The description doesnt sound quite like what I do.... I guess its hard to describe....But with that trick, It comes off easier, but not so simply as I would like....

Mac
Former Harbor Master/Boat Tech, Certified in West System, Interlux, and Harken products.
Worked on ALL aspects of the sailboat, 17 years experience.
"I wanted freedom, open air and adventure. I found it on the sea."
-Alaine Gerbault.