jib

[jimdoesmo]

does the jib sheet go out or inside shroud on gp 16

[deisher6]

I run mine on the outside.  Our C16 has a genoa track and spreaders.  Earlier models probably allow rigging both ways.
Hope that this helps.

regards charlie

[JTMeissner]

Depends on the sail.  For the standard 110 jib on a MK-1 CP 16, the sheets go inside the shrouds and through the cleats at the front of the cockpit.  When I fly a 155% genoa, the sheets go outside the shrouds through the rear cleats then a clam cleat on the cockpit combing.  Not ideal, someday I'll get around to adding track, pulleys, and cleats for the large sail. 

-Justin

[jimdoesmo]

Depends on the sail.  For the standard 110 jib on a MK-1 CP 16, the sheets go inside the shrouds and through the cleats at the front of the cockpit.  When I fly a 155% genoa, the sheets go outside the shrouds through the rear cleats then a clam cleat on the cockpit combing.  Not ideal, someday I'll get around to adding track, pulleys, and cleats for the large sail. 

-Justin

thanks

[jimdoesmo]

I run mine on the outside.  Our C16 has a genoa track and spreaders.  Earlier models probably allow rigging both ways.
Hope that this helps.

regards charlie thanks