Print Page - Teak and Holly Sole thickness

Title: Teak and Holly Sole thickness
Post by: HJ51 on December 08, 2016, 06:54:01 PM

I'm assuming it's veneer over plywood. Does anyone know if it's 1/4" or is it less? Concerned about sanding it to refinish if it's less than 1/4". Thanks in advance.

Title: Re: Teak and Holly Sole thickness
Post by: HideAway on December 08, 2016, 10:28:56 PM

It is a veneer. The teak and holly part is about 1/16". You would be better off to refinish rather than sand. In my case the T&H had delaminated so the sole had to be replaced. I made a video during the HideAway refit showing the removal of the sole. I also made one of showing the replacement. Hope this helps M

removal link: https://youtu.be/VayEq1Gvbx8

Replacement link https://youtu.be/wJNtBVQ_Z60

Title: Re: Teak and Holly Sole thickness
Post by: Blown Away on December 12, 2016, 10:09:07 PM

You may be interested in this.

http://www.nautikflor.com

Title: Re: Teak and Holly Sole thickness
Post by: HJ51 on December 13, 2016, 01:16:53 PM

Hideaway: thanks! Very helpful.

Com-Pac Yacht Owners Association

Com-Pac Model Specific Discussions => CP-23's => Topic started by: HJ51 on December 08, 2016, 06:54:01 PM