Print Page - Standing Rigging Question for CP16-1

Title: Standing Rigging Question for CP16-1
Post by: MKBLK on August 26, 2016, 05:29:02 PM

I'd appreciate it if someone would post pictures of how their headstay AND jibstay are secured to the bow of a CP16-1.

Thanks,

Marty K.

Title: Re: Standing Rigging Question for CP16-1
Post by: Salty19 on August 27, 2016, 11:00:30 AM

Marty,

First off, sorry to hear about your demasting situation. Glad you were not hurt!

I don't have pictures, but there should be two chainplates on the bow. The way I had my 16 rigged before a made a DIY furler was the forestay pinned to the front/forward chainplate and the jib had a bronze spring hook tied to the tack and clipped onto a shackle that was pinned through the aft chainplate. I"m pretty sure that is the factory configuration, or thereabouts.

Com-Pac Yacht Owners Association

Com-Pac Model Specific Discussions => CP-16's => Topic started by: MKBLK on August 26, 2016, 05:29:02 PM