Sorry to need to ask, my boat is in storage some distance away at the moment and I'm looking for measurements for some projects to determine if I need to procure more wood.
Would anyone be so kind as to give me a couple of measurements from your CP19? I meant to get these before storing the boat but overlooked it.
-Cockpit footwell depth at forward end of cockpit. From cockpit floor to bridge deck. Should be about 12" ?
-Cockpit footwell length from bridge deck to locker opening (before it curves under the locker).
-Distance between top of the bilge pump casing to the seating surface.
Doesn't need to be super accurate--1/4" off either way is fine for now.
Thanks guys...appreciate it!
Would appreciate a reply, any takers?
As soon as I get home on tuesday the 19th if you don't have it already.
TG
Salty, I will go to the yard tomorrow, a mile away, and call you with measurements. It is under a tarp but accessible if you need any thing else here in UA.
Thank you, Bill! I saw you called, I'll give you a callback tomorrow evening.
Tim, many thanks for the offer. Enjoy Florida while you're there and please say hello to the Admiral.
Hi Salty:
Today was a little warm here in MD, so I went out in the back yard for those measurements. I have a 1986 19/2 and these are the ones you were looking for as pertains to my boat:
footwell depth @ fwd end: 10 inches
cockpit sole length, bridge deck to gas locker: 52 inches
distance from top of bilge pump casing to seating surface: 2 inches (I have replaced the original casing with a Whale one with a door so the rubber is no longer exposed to the sun; the casing measurements should be the same or very similar)
I hope this helps.
Fair winds,
Elk River
Thank you Bill and Elk River! Got what I needed!