Text only | Text with Images

Com-Pac Yacht Owners Association

Com-Pac Model Specific Discussions => CP-23's => Topic started by: hockeyfool on August 10, 2014, 09:10:38 PM

Title: Where to properly place hull numbers on main and logo on jib?
Post by: hockeyfool on August 10, 2014, 09:10:38 PM
  The guys at Sail Care gave me extra decals of hull number and Compac logo for adhering both main and jib;
can someone show me where to properly place these?
Title: Re: Where to properly place hull numbers on main and logo on jib?
Post by: nies on August 10, 2014, 09:24:36 PM
My sail makers patch is coming loose on the corner of my jib................................what can I use to glue back on sail?.............nies
Title: Re: Where to properly place hull numbers on main and logo on jib?
Post by: JTMeissner on August 10, 2014, 10:44:01 PM
Can't speak for the jib, but on my main, the logo is about 1/3 from the top centered and the number is towards the leech about halfway, offset above/below for readability through the sail. 16 versus 23, but I think the idea is the same.
(http://i1125.photobucket.com/albums/l594/CPYOA/com-pac%2016%20pics/BaBaLeLe/Adjustingatthedock.jpg)

As far as glue, found recommendations for 3M 77 spray adhesive.  If not that, then a fabric glue may work (seems more precise than spray).

-Justin
Text only | Text with Images