Can anyone tell me the best way to change out the 130 genoa on a profurl furler?
Thanks
They should change out like any other unit.
There should be a jib halyard that you release when the sail in unfurled preferable in light to no winds .
Then you pull down on the sail until it is all out of the track and removable.
Tie a small line to the car, and to the bottom of the unit so the car wont go up the furler.
attach new sail reverse of the removal procedure.
Mac
Depending on your model, this may help:
http://www.profurl.com/images/info_pages/c260-manuel-light-41.pdf
Steps 12 thru 18 cover raising, using and lowering.
Quote from: brackish on November 22, 2013, 11:20:26 AM
Depending on your model, this may help:
http://www.profurl.com/images/info_pages/c260-manuel-light-41.pdf
Steps 12 thru 18 cover raising, using and lowering.
Thank you!
Quote from: MacGyver on November 21, 2013, 04:49:52 PM
They should change out like any other unit.
There should be a jib halyard that you release when the sail in unfurled preferable in light to no winds .
Then you pull down on the sail until it is all out of the track and removable.
Tie a small line to the car, and to the bottom of the unit so the car wont go up the furler.
attach new sail reverse of the removal procedure.
Mac
Thank you. That helps!