Can some one direct me to a parts source for a 1985 Hutch Trailer..stock for the CP19. I have rust problems with stanchion connectors at c-channel frame and need replacements for 12" bow roller chocks.
Let me know if you find a source. I couldn't, so ended up finding a local welding shop that made custom replacements for me, copies of the old ones. I could find no trace of the Hutch trailer company nor any listings for parts.
Wes
Quote from: Mike on October 22, 2013, 04:28:44 PM
Can some one direct me to a parts source for a 1985 Hutch Trailer..stock for the CP19. I have rust problems with stanchion connectors at c-channel frame and need replacements for 12" bow roller chocks.
I have a message to E Trailer to replace entire stanchion with a slotted unit but they are only 11" long and I doubt if it can be modified to meet the 14 1/2" distance from C-channel at the frame to the underside of existing bow (2x4) supports at the hull. Thanks for the response.
After searching for trailer parts for the trailer that came with my boat(78) I found out the org. company was out of business, most parts can be found on line and the metal channels can be found at the local welding shop....nies
Quote from: nies on October 22, 2013, 05:55:12 PM
After searching for trailer parts for the trailer that came with my boat(78) I found out the org. company was out of business, most parts can be found on line and the metal channels can be found at the local welding shop....nies
Were you able to locate a replacement for the connection from pipe stanchion to c-channel on trailer frame from a company on line?
Sorry never looked for that part......................nies