Text only | Text with Images

Com-Pac Yacht Owners Association

Com-Pac Model Specific Discussions => CP-19's => Topic started by: fasteddie on May 18, 2013, 11:42:49 AM

Title: pelican hook on port side
Post by: fasteddie on May 18, 2013, 11:42:49 AM
i have my 19  (1982) in a slip for the season, and always taking "older " friends out for a sail, where can i get a pelican hook that screws on the end of my existing lifeline so its easier to get in and out ?
Title: Re: pelican hook on port side
Post by: skip1930 on May 18, 2013, 09:18:10 PM
A West Marine store. Or some similar ship's chandlery. Often found at marinas, or boat harbor stores.

skip.
Title: Re: pelican hook on port side
Post by: DougN on May 18, 2013, 09:41:30 PM
check out this site..Marinepartdepo.com.
Title: Re: pelican hook on port side
Post by: fasteddie on May 19, 2013, 11:52:39 AM
Thanks, but what thread size is needed to screw on exiting line , there are a lot of sizes?
Title: Re: pelican hook on port side
Post by: DougN on May 20, 2013, 09:26:54 AM
Mine are 1/4x28,you also should have right and left hand threads(made that mistake more than once)good luck...Doug
Title: Re: pelican hook on port side
Post by: fasteddie on May 20, 2013, 11:00:08 AM
Quote from: DougN on May 20, 2013, 09:26:54 AM
Mine are 1/4x28,you also should have right and left hand threads(made that mistake more than once)good luck...Doug
[/quot       THANKS
Title: PELICAN HOOK FOR 82 CP19
Post by: fasteddie on May 20, 2013, 11:04:30 AM
DOUG, TOLD ME HIS ARE 1/4X28, BUT YOU HAVE TO KNOW IF ITS RIGH OR LEFT HAND THREADED, DOES THAT MEAN IF IT GOES ON COUNTERCLOCKWISE IT Is left threaded and clockwise is riht threaded ?
Title: Re: pelican hook on port side
Post by: dbinvermont on May 20, 2013, 01:33:07 PM
That's it. Right hand goes on clockwise.
I did mine without replacing the threaded part, the Pelican hooks have loops on the end instead of a threaded female.
Text only | Text with Images