Print Page - Prop size

Title: Prop size
Post by: thedavo on April 22, 2005, 06:30:14 AM

My 27/2 has the smaller ten horsepower Universal diesel (they call it the M-12). Does anyone else have this motor and what size is your prop? I'm looking into a Flex-O-Fold three blade and I would like to know the parameters so I can get some sort of fix on the cost of one of these things. Thank you. Dave.

Title: My prop is stamped 9x12 (nm)
Post by: Steve W. on May 02, 2005, 10:28:05 AM

.nnnnn

Title: I see that headed
Post by: Steve W. on May 02, 2005, 10:29:30 AM

Mine is stamped 9x12

Title: Prop size
Post by: Craig on May 02, 2005, 09:40:40 PM

Don't be afraid to email Com-Pac and ask. They are real good at responding quickly and with good information.

Craig

Title: prop/shaft size
Post by: Alec Hart on May 23, 2005, 11:24:01 PM

thedave;

If/when you get info from Com-pac, please post. I've been considering the same upgrade to a feathering 3-blade prop, and was going to call Jerry (at Hutchins) to find out the shaft size on the M-12 outdrive.

Thanks

Title: Anything?
Post by: Alec Hart on November 14, 2005, 11:15:07 PM

Dave;

Did you get any information on props, shaft size, pitch, (anything on engine rpm range) if/when you contacted COM PAC?

Title: Re: Prop size
Post by: DH on October 14, 2007, 05:36:47 AM

Anyone ever get any info. on a fixed 3 blade prop. What kind, and did it stop prop walk to port?

Com-Pac Yacht Owners Association

Com-Pac Model Specific Discussions => CP-27's => Topic started by: thedavo on April 22, 2005, 06:30:14 AM