Is Isomat the factory supplier of 1988 Com-pac 27 spars? Also, if Isomat is the NOS source, who is the factory manufacturer or supplier for the standing rigging? Trying to get a feel for how much and where to get replacement rigging if I purchase this fixer-upper I am looking at. I am thinking JSI in St. Pete FL would be a good source but probably only if they are familiar with the Isomat requirements for terminal rigging hardware. This boat utilizes stemball fittings at the spreaders for the lower shrouds and I am guessing a "T" type fitting for the upper shrouds at the masthead. This boat suffered rigging failure during Hurricane Charlie (the bowsprit stay that goes from the waterline to the bowsprit parted and showed evidence of corrosion that may be present in the rest of the rigging. thanks. dave.
I believe Com-Pac uses Dwyer as their supplier.
http://www.dwyermast.com/
Someone recently priced a new mast and standing rigging for a 16 and wound up buying from the factory. Give Com-Pac a call.
Craig