Com-Pac Yacht Owners Association

Com-Pac Model Specific Discussions => CP-16's => Topic started by: Salty19 on November 06, 2009, 12:24:48 AM

Title: 1992 CP16 XL Original Sales Literature
Post by: Salty19 on November 06, 2009, 12:24:48 AM
Thought you all may enjoy something that came with the paperwork of my CP16/I. Looks like the guy was shopping for an XL.


Front Page

(http://i188.photobucket.com/albums/z290/yamaholic_mcarp/CCF11052009_00000.jpg)


Rear Page

(http://i188.photobucket.com/albums/z290/yamaholic_mcarp/CCF11062009_00000.jpg)


Pricing Data, note 1992 Date

(http://i188.photobucket.com/albums/z290/yamaholic_mcarp/CCF11062009_00001.jpg)

Specifications

(http://i188.photobucket.com/albums/z290/yamaholic_mcarp/CCF11062009_00002.jpg)



Title: Re: 1992 CP16 XL Original Sales Literature
Post by: Sam in VA on November 30, 2009, 06:47:04 AM
Thanks!  The picture of the interior certainly makes it look spacious!
Title: Re: 1992 CP16 XL Original Sales Literature
Post by: Salty19 on November 30, 2009, 03:41:00 PM
Hi Sam-

Yes, it looks huge doesn't it?

I also now have the same literature for the CP19/III and CP 23/III.  However given how blurry the above pictures are after scanning and resizing, I think I'll hold off on posting them.
Title: Re: 1992 CP16 XL Original Sales Literature
Post by: Craig Weis on December 04, 2009, 03:36:34 PM
Salty19, looking at the dealer's stamp...I see Dexter-Pickney, Michigan!! I lived in Jackson, MI and worked in Rives Junction, MI but we had the main Ben Stahl plant in Pickney, MI. Pickney Products. He had four other plants around too boot!
Always enjoyed my trip through Hell, Michigan. Sometimes we traveled by a Huey L.O.S.H. helicopter.

Pulling wire and cut/straighten/bend/coin and pierce rod and tubes. Over 3000 part numbers, and 4 million pounds of bolts a year.
skip