:?: I am interested in finding information regarding the optional galley/table that was offered for the CP-19. Would Hutchins offer plans or other information on this item? I have hull no. 93 and it was apparently not offered at that time (1982). What did Hutchins do to the 19 to accept the galley system in later hull nos.? I have seen the very nice fold away galley on this site. I would like to have some sort of table and a platform to run a small marine butane stove. I would also like to be able to place a fresh water container with some sort of a supply hose/pump in one of the V-berth lockers. I could use a pail for the sink and just dump the gray water. Somehow I don't like the idea of dumping gray water into the bilge. Thank you anyone for any information on this topic. Steve
Steve,
Ask com-pac. They are very friendly and helpful. Contact information is on their website.
Craig
Hi Steve,
You could make a much simpler fold away galley than the one I made. A nice board with a sink cut in that drains to a bucket is a fine idea. Having water that you can tap frees your hands. Cover the sink with a cutting board would make all the counter top you need. Fold this cutting board away with hinges would expose the sink and make even more work top.
Give me a FAX number and I'll send you a drawing. You could make this in a couple of hours. Mine while nice is overkill.
734 355 0960
Marcus, Thankyou for the drawings. I will be preparing a measured drawing for my final design based on your suggestions and will make sure you get a copy. I would also make it available to other CP19 sailors if requested. Think Spring. Steve :)