I need to replace worn rudder bushings. If I'm unable to find suncat-specific parts at a dealer, does anyone know the specs for these parts? Need length,, outer diameter and inner diameter. I believe the ID is 5/16 in and OD is 1/2 in but could be wrong and I don't have great measuring devices.
I'm also interested, needing to do this too. I bought nylon business from ace hardware which I'll try this weekend.
Try this discussion: https://cpyoa.com/forum/index.php?topic=2115.0
A lot of the photos are not available now, but the text still shows.
Jon
One thing I noticed throughout the rudder bushing threads in the archive is how often the "gudgeons" were drilled out to fit specific bushings, and replacement "pintles" substituted, neither likely sourced from Com-Pac.
Especially if you're not the original owner, I would rely on your measurements rather than what someone else used. Plenty of decent analog calipers out there for not much.