I bought a brand new forespar 406100 ADJ 6-12 DL to help out in light air, unfortunately I must have had 3 foot-itis when I bought it, since even in its smallest state, it is too long to help out on my 19. If anybody could put it to good use, I'd like to convert those boat bucks into a Windknife Aluminum Exctrusion. I still have to look around for the pad eye and screws(never installed) but I'll find 'em. is $150 + shipping acceptable? I can add/send pics if you need them.
Keith
I'm interested. I have a CP 23.
While I'm pretty sure it will work, I reached out to Forespar to confirm if your model will fit my boat. I live in Fredericksburg, VA and could drive up to Herndon to save on the shipping cost.
Phil
Quote from: pcvivavt on April 13, 2024, 09:28:07 PMKeith
I'm interested. I have a CP 23.
While I'm pretty sure it will work, I reached out to Forespar to confirm if your model will fit my boat. I live in Fredericksburg, VA and could drive up to Herndon to save on the shipping cost.
Phil
The Forespar data says 22' max but I've been using one on my 23 for many years. The wind conditions where I sail require wing and wing often and without the pole I'd have trouble with that. You'll need a fitting for your mast, I found a used section of track with adjustable ring that I installed. Works well
Keith:
Thanks for the quick response. Definitely interested in buying it. My direct email is pcvivavt@gmail.com and my cell is (703) 937-7104. I would be happy to drive up to Herndon to pick it up if that works for you.
Hi Phil,
I'll shoot you a text.
KB
This Sold... Great meeting you Phil!!!