Suncat owners may recognize the keystone shape of this accessory I made, and am still modifying. It is the rear cushion on my set, which I think was originally from Hutchins.
The details:
--3/4 King Starboard
--Sides routed inside/outside with roundover bit for when a leg rests over a corner.
--Throughbolted to the "fuel compartment", for which other uses are actively being contemplated
--eProp Spirit remote (screw-eyes on exterior rear corners for clipping in lanyards out of site)
--Cup holders currently mounted to rear through bolts. I intend to move them half-way between the front and back mounting bolts so that the cups I use and bottles pass under the tiller neatly. I originally had them on the front bolts, but this messed with seating.
--For now, the whole tray protrudes about 1/2" over the cushions. I'll probably keep it this way.
Please forgive the shot. There was a too much glare to see much on my phone and I was obviously underway. BTW, I almost sold the auto-tiller a couple of years ago--really glad I didn't in retrospect.
(https://lh3.googleusercontent.com/pw/ACtC-3cIcxvtgAQnJ8dzsSixViCtnKVmSU_DOuj1MpHtJdbUBr5mmmSnw-0_jHnhPsFJRJV8YRsNmKyIlvDNifm22zroxp1rpOzT3yC2XaCtf7K2FK5X-GZqxTYWOLUdGZ7v3MH3mYI2r85tzucjMe10QlI=w1098-h1464-no?authuser=0)