Com-Pac Yacht Owners Association

Com-Pac Model Specific Discussions => CP-16's => Topic started by: jimbo on June 10, 2021, 11:45:07 AM

Title: genoa cleat & track
Post by: jimbo on June 10, 2021, 11:45:07 AM
I am installing a genoa on my CP -16.  I need to install a jib lead cleat and track.  Does anybody have any recommendations or suggestions?  Also how and where did you install it?
Thanks.
Title: Re: genoa cleat & track
Post by: carry-on on June 15, 2021, 09:14:48 PM
Several years ago, we installed 5/8 inch tracks on the gunwales of our CP16. Bought the tracks from Annapolis performance Sailing. I think that company is out of business.
The Genoa cars were Ronstan??
We also added sliding eye fittings which were handy to hang a fender.
The whole business was about $300 in 2015.
You probably don't need a five foot track but that gives a great range for adjusting a 155% sail. Also, the extra screws holding the longer track add some holding power.
Good to have a helper when installing the straight track on the curved gunwale. The track can be a bother if you usually rest your arm there.

Title: Re: genoa cleat & track
Post by: jimbo on June 18, 2021, 06:05:31 AM
Thank you very much.