Com-Pac Yacht Owners Association

Com-Pac Model Specific Discussions => Sun Cats and Sunday Cats => Topic started by: Shannonpn on June 06, 2021, 07:22:13 PM

Title: factory Bimini installation for Sun Cat
Post by: Shannonpn on June 06, 2021, 07:22:13 PM
For the Sun Cat Bimini?I have seen the instructions as well as some pictures and they either have the strap loops on the top or the side of the gunwales?just wondering if there is a preferred location? Im thinking the side would be more out of the way?

Just thought I  would check to see if any insight that would help me decide before I drill away....the factory instructions show on the side but than from the factory they are on the top at times.

Thanks!

Peter
Title: Re: factory Bimini installation for Sun Cat
Post by: Jim in TC on June 07, 2021, 08:08:46 AM
If I get to the boat today I will check, but I am pretty sure our fore loops are on top of the combing and the aft ones are just behind. There is quite a lot of play in the strap adjustment.
Title: Re: factory Bimini installation for Sun Cat
Post by: DanM on June 07, 2021, 08:34:57 AM
You can see a factory-installation in this picture
Title: Re: factory Bimini installation for Sun Cat
Post by: DanM on June 07, 2021, 09:37:33 AM
PS you can see both attachment points if you scroll the photo side-to-side
Title: Re: factory Bimini installation for Sun Cat
Post by: Shannonpn on June 07, 2021, 09:55:42 AM
Excellent Dan and thanks!

Peter