Com-Pac Yacht Owners Association

Com-Pac Model Specific Discussions => CP-16's => Topic started by: rustyw007 on April 20, 2020, 10:00:30 PM

Title: Newbie requesting help setting up the rigging
Post by: rustyw007 on April 20, 2020, 10:00:30 PM
Hi,

I have a new to me 1981 Compac 16. I'm just learning to sail (completing ASA courses as I write this). Does anyone have a document/diagram of how to assemble the rig? Or would someone be willing to send me some close up pics of theirs the next time they go out? I've gotten as far as figuring out how the boom fits in the channel on the mast. :) Topping lift, backstay (is there one?), traveler, attaching the jib (a hank on I assume) is all still a mystery to me. Any help (especially pictures) appreciated! Thanks much!
Title: Re: Newbie requesting help setting up the rigging
Post by: geeman on April 20, 2020, 11:16:16 PM
I don't have photos, but I did find a link with a couple of good shots that show how it should look.
https://standingatthehelm.blogspot.com/2011/04/com-pac-16-and-16-2.html .  If this causes more questions than it answers, let me know.
Title: Re: Newbie requesting help setting up the rigging
Post by: Tim Gardner on April 21, 2020, 06:12:48 AM
Rusty,  Call Gerry Hutchins and buy a manual for the 16.  It's inexpensive, and can be the basis for your log book on your new boat.

TG
Title: Re: Newbie requesting help setting up the rigging
Post by: Mas on April 21, 2020, 09:40:34 AM
Rusty, besides the manual which is a good thing to have, consider this book. It was written with a Compac 16 in mind. Lots of good information including rigging diagrams.

https://www.amazon.com/Handbook-Trailer-Sailing-Robert-Burgess/dp/0070089817

Congrats on the boat. Got one almost 40 years ago, and long with a how to sail book, we sailed her for 10 years before selling her. Got another 3 years ago. Will never part with her, too simple, too easy, too affordable, and TOO many fun folks on this forum.

Mas
Title: Re: Newbie requesting help setting up the rigging
Post by: Gerry on April 21, 2020, 09:54:51 AM
I have a CP16 from 1981 (hull #1330). As I embarked on fixing my project boat I found many books, mags, and articles helpful.  The suggestions above  were essential.  May I add Small Craft Advisor, issue #70.  I have a few articles I could copy and send you.  Most importantly is to search topics in this forum.

Gerry
Title: Re: Newbie requesting help setting up the rigging
Post by: rustyw007 on April 21, 2020, 12:47:58 PM
Thanks for the help all. I'll go through the listings and suggestions. I appreciate everyone's time.

I have also ordered the manual - I'd like to have it just for "completeness" and it wasn't expensive anyway.