Com-Pac Yacht Owners Association

General Com-Pac and Sailing Related Discussions => Com-Pac Sailors Lounge => Topic started by: Don Claustro on October 06, 2019, 11:41:19 AM

Title: New Com-Pac 16 owner
Post by: Don Claustro on October 06, 2019, 11:41:19 AM
Hi Everyone ... brand new member here hailing from the Great Lakes, specifically Midland Ontario on Georgian Bay. 2 days ago I picked up a remarkably good condition CP16 (c/w tilt trailer) but that had been left sitting under pine trees for the past 3 or 4 years.  Needless to say I've spent the past 2 days scrubbing and inspecting.  It came with it's mast and stays (which all looks to be AOK) but she's missing her boom and sails.  The concrete ballast wasn't sealed so I suspect that the keel is saturated ... which probably explains the poorly executed exterior keel repair attempts.  I'm pretty handy and good with fibreglass (both polyester & epoxies) and I'm really looking forward to making her ship-shape Bristol Fashion.  Thanks so much for the add and I'm looking forward to participating in the forums ????
Title: Re: New Com-Pac 16 owner
Post by: Don Claustro on October 06, 2019, 11:46:18 AM
I'll add a few pics ... once I figure out how ????
Title: Re: New Com-Pac 16 owner
Post by: bruce on October 06, 2019, 01:02:14 PM
Welcome Don!

Photos, and other files, are easy to attach. In the New Topic or Reply window, there will be an Additional Options button at the bottom left. Hit that and you'll see Attach, and the file types supported. You do have to make sure the file sizes are less than 250 KB; limit of 4 per post.

http://cpyoa.geekworkshosting.com/forum/index.php?topic=9472.0
Title: Re: New Com-Pac 16 owner
Post by: geeman on October 06, 2019, 02:17:30 PM
Welcome!  I'm very interested in seeing before and afters of your repairs, especially of the keel.  Good luck with it.
Title: Re: New Com-Pac 16 owner
Post by: Jasmid53 on October 06, 2019, 02:48:07 PM
Welcome to the club. When I first got my 16 I couldn't figure out where the water was coming from. I reset all the ports and all the wood. Then I noticed that the stay plates sandwich the hull. One on the outside and one on the inside. A slot is cut in the deck to let in the inside stay plate. All my water was coming in through that slot. Removed all the old chalking and used that 3M stuff. Water problem solved.

I drilled a hole in the forward bottom of the keel and tipped the boat to let it drain. Took about three days to remove about three liters of water. Then glassed the hole up. I didn't have any problem with the concrete being all crumbled.

Good Luck
Title: Re: New Com-Pac 16 owner
Post by: Bramble on October 09, 2019, 07:05:39 PM
Welcome aboard
mike
Title: Re: New Com-Pac 16 owner
Post by: ameysails on October 16, 2019, 11:08:12 PM
welcome from Lancaster PA USA
still having great autumn winds on Lake Clarke with our1998 CP 16cb "Well Keel'd"
love to see some pics of your beauty...her name = ?
is your mainsheet at midship?
do you have life lines
if you need some headsails...we have an extra 120 jib
good folks here to help


start using  energy and $ in the re-birth of her